Home
Up
TP Audio
TP_Audio Calendar
TP_Audio Links Page
Tim's Computers Page
Tim's Hi-Fi Page
Tim's Misc. Stuff Page
Tim's Personal Page
Tim's Pool Page

 

 

 

Rack Stuff

 

Disclaimer

The following devices are not UL listed, and may not meet federal, state, or local codes.  If you use the following information as a guide for your own gear, you do so at your own risk.

 

Also check out my AC Cables and Bar Distro pages.

 

Monitor Rack Output and AC Panel.   Each Neutrik PowerCon Inlet feeds an Edison Outlet (in the blue box).  The Thru outputs allow other racks or band power to be fed from the rack.   If it is necessary to run the rack from a single AC feed, the second Input can be powered from the first Thru (or vice versa) via the pictured jumper.

The monitors (six mixes) are fed via Neutrik NL4 connectors.  Connections to the amps are via Deltron banana plugs (Mouser 174-5791 (black) and 174-5795 (red) - the best I've found) (I don't use bare wires or spades - crimps are unreliable IME).

 

 

 

 

Here's a little rack that I put togther for the H.J. Ricks Centre for the Arts.  It's a work in progress - the AC I/O and speaker outputs are not yet up to snuff.  Since the pic was taken, a panel was added to allow the effortless connection of IEM transmitters.   I need to add AC outlets for the IEMS.

 

 

 

Also check out my AC Cables and Bar Distro pages.

 

Home Up TP Audio TP_Audio Calendar TP_Audio Links Page Tim's Computers Page Tim's Hi-Fi Page Tim's Misc. Stuff Page Tim's Personal Page Tim's Pool Page